Position:Home > Products > Polymer > Polystyrene(PS) > Article content

XPS Environmental FRMB(FR/MB-XPS70)

Update time:2016-11-22 11:52:23Click times:520


Description

This product is mainly used for Polystyrene foams, especially for extruded foamed Polystyrene (XPS), which is used in external thermal insulation system. As the substitute for traditional HBCD FR masterbatch, it is produced by the environment-friendly bromine-phosphorous FR , polystyrene as the carrier resin, flame retardant synergistic agent, small molecule capture agent and macromolecular chain-extender agent and other auxiliaries compound. Otherwise, it can give the sheets more excellent comprehensive performances than HBCD masterbatch.


Benefits

1. Higher heat-resistance performance(decomposition temperature 280). No corrosion of the screw.

2. Good smoke-suppression performance. It can make smoke density reduce about 30%.

3. Improve melt`s viscosity and strength, and then improve the compressive strength of the foams and provide better mechanical properties.


Specifications

Items

Units

Test method

FR/MB-XPS70

Appearance

---

---

Nature granule

FR content

%

---

≥70

Carrier

---

Polystyrene

≤25

Moisture

%

105℃2h

≤0.5

Density

G/cm3

GB 1033-2008

1.3-1.5

Flammability

%

GB 8624-2012

DIN 4102-1

EN 13501-1

B1 6-8B23-5

B1 6-8B23-5

B 6-8E 3-5


Processing:

       1. As the main flame retardant has a low melting point, it is recommended that the product is used on double-screw XPS production equipment, and lower the temperature of feeding stage. It also application to the single-screw production line, but should use reasonable processing technology.

2. When using the masterbatch, it should be fully mixed with PS and avoid to produce the phenomenon such as current fluctuations in production.


Packaging and Handling:

25kgs/bags with PE innerhandle with care, cold storage. In ventilated and dry condition.